201804.19
Immersion Test report for IP67 approval
Product Information: |
|
Product Name: |
Type C waterproof product |
Part Number: |
USWRRG5N6B2C1-190M |
Sample Size: |
1 pc |
Department: |
R&D/ Engineer Hu |
Test Item: |
Immersion test |
Test Method: |
|
Water Depth: |
1.0 m |
Water Temperature: |
25±5°C |
Test Requirement: |
Immerse the product in 1.2m depth for 30 mins |
Pass Standard: |
|
|
The parameter of the air leak tester is set to be, increase pressure 5s – test 8s. Check the leakage standard, if the leakage standard is within +0.0089 inHg è Pass |
|
Immerse the product in 1m depth for 30 mins in room temperature and ordinary pressure. After immersing, if the product does not have water leaking, waterdrop, and vapor. è Pass |
Equipment: |
Air leak tester KY-230 / 1.2m depth water vet. |
Result:
- Increase pressure 5s – balance 5s – test 8s, check the leakage standard. Leakage standard is 0.0083 inHg èPass
- The connector is immersed in 1,2m depth for 30 mins in room temperature and ordinary pressure. No water leaking, waterdrop and vapor. èPass
back to top